This particular neck I was going to put on a sanding sealer and then lacquer.
Something like this for masking?
I have never used a sanding sealer before if anyone has any tips. I just heard it is great for getting the surface super smooth.
Spray a couple of coats of it then the lacquer straight on top after it cures? Then sanding between coats?
Sent from my iPhone using Tapatalk
Back to blue
Setting it aside for a week to cure before sanding and lacquering. Hope that will be enough time this time
Sent from my iPad using Tapatalk
you show great taste.....
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Starting to show masses of promise now.Originally Posted by Freakystyley
Back to blue
Setting it aside for a week to cure before sanding and lacquering. Hope that will be enough time this time
Sent from my iPad using Tapatalk
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
That is a thing of beauty. I might not achieve that quality but I hope it looks half as good
Sent from my iPhone using Tapatalk
Waiting for the body to cure.
Pablo didn’t get back to me so I’ve hacked out a custom scratchplate. Happy enough
https://media1.tenor.com/images/e6db...itemid=4689298
Waiting is the hardest part....
Sent from my iPhone using Tapatalk
Someone doesn’t want me to build this guitar. This is the 2nd time it has been primed and coloured, can’t seem to get the finish done. 1 year later and I’m just about to give up. As soon as I sprayed a bit of lacquer it just ran. Looks like I unloaded the can on it but I swear it was a quick light mist. ( I even said that to myself to as I begin so as to be sure it will be ok .lol.) it was a light sand with 320. I reckon this one will just have to be firewood.
Sent from my iPhone using Tapatalk
Just let it dry nice and hard and block back that bit.
Is this just the solid colour or clear that has run?
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
The clear. But I think it has picked up some of the colour too. I reckon I would have to sand back and spray colour again which I don’t have anymore of. And patience which I seem to have ran out of too. I think it has defeated me
Sent from my iPhone using Tapatalk
Now I can't remember who to give the initial credit for the suggestion, but one of these has come in handy for getting greater control of the spray paint can.
From the big green shed.
BTW I start spraying past the guitar and keep the can moving past it in both directions.
cheers, Mark.
Posting Permissions
Reply With Quote
