Hi Michnet, welcome to the forum.

Had a look at your photos and agree the nut situation looks wrong but mainly because it appears to be sitting too high? If so, easily fixed by knocking out the nut and sanding down that section. Probably a good idea to install a better nut too while you're at it.

Overall grain pattern on the body is better than most as many turn up with very mismatched planks with grain heading off in different directions.

In relation to fret lengths and seating, fret board & radius if you are not happy and believe it is faulty suggest you email Adam before starting any work on it to see what he can do. He is a very approachable fella.

Cheers, Waz