Thanks Waz, your a legend, that looks pretty much like the shopping list I had from your earlier description. That wiring diagram certainly helps. Down the track I'll look at either the Toneriders or those Bullbuckers for the 6 string.Originally Posted by wazkelly
Hi Brendan, thought it might be easier to answer some of your questions here within your build.....
This is the hyperlink to how to wire up coil splitting for the stock soapbar humbuckers that come with this kit - http://www.buildyourownguitar.com.au...ead.php?t=6476
$8.50 each at Real Parts and come in 500KA or 500KB - https://www.realparts.com.au/electro...pull-pots.html
$12.00 each at Real Parts - https://www.realparts.com.au/electro...tches.html?p=1
$4.50 each however there is a cheaper ceramic one for $0.90 that would be ok plus it is a good idea to add in a treble bleed @ $4.50 - https://www.realparts.com.au/electro...apacitors.html
$8.50 each, bit of a luxury but a recessed jack socket looks and feels so much better - https://www.realparts.com.au/hardwar...lates.html?p=2
$0.90 per 30cm length and should need at least 1 x white & 1 x black but better off getting 2 lengths of each, just in case - https://www.realparts.com.au/electronics/wire-tape.html
Also, don't forget to buy a better output jack @ $3.90 for a mono - https://www.realparts.com.au/electronics/jacks.html
All up, approx $50 - $60 incl around $10 for postage.
I have used all these parts, except for Alpha pots as I used the slightly more expensive Bourns ones @ $12.00 each and they look very similar.
Cheers, Waz
I am so impressed by this forum as a whole and the lengths forumites will go to help others out, it is rare to find nowadays. I owe you some beers Waz, is xxxx on special?
Reply With Quote