Tin foil hat too perhaps?
Sent from my SM-A520F using Tapatalk
Tin foil hat too perhaps?
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
In the words of the song....Originally Posted by wazkelly
“Just because you’re paranoid, don’t mean they’re not after you...”
Thanks for the tips Simon, I’ve enough shielding left to do some bridging on those points.
I couldn’t help myself, I had to mock up. Though I have found there are some significant electrical gremlins to over come.
I don’t have buzz, I don’t have microphonics, in actual fact I have nothing.....nothing at all.....I am, puzzled, to put it mildly.
I have noted that a lot of the solder joints in the factory pick guard were ugly, like, hated mother in law ugly. There are snipped wire ends still imbedded in the earth connections on the pots and the connectors. Most of them looked almost corroded around the periphery of the solder blobs as well.
The volume pot looked shot so I have replaced that with a new alpha pot.
Both the tones were wired with caps to the middle connector, and wired to switch from the left connector. I’ve since re-wired to a standard Strat diagram
https://guitarelectronics.com/strat-...iring-diagram/
But still no dice on noise...any noise at all. I’m going to back track from the Jack forward and see what else I can proof test.
I’m really hoping it isn’t the switch.
Sent from my iPad using Tapatalk Pro
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Reply With Quote
