Specs on the FS-1 Bridge for Upgrading?

[neverwas]

This is the bridge I'm using on my FS kit.

I've used plastic tubing to hold the posts in place instead of knocking the bushes in, not done with clear coats yet.

The post spacing is 74mm and dropped straight in, although this kit is 18 months old and post spacing may have changed as Dedman has suggested.

Grant

[iodine74]

This is the bridge I'm using on my FS kit.

I've used plastic tubing to hold the posts in place instead of knocking the bushes in, not done with clear coats yet.

The post spacing is 74mm and dropped straight in, although this kit is 18 months old and post spacing may have changed as Dedman has suggested.

Grant

Yeah mine was part of the Christmas batch from this past year, so the newer. Though I just went and took my caliper, set it at 74mm, seems wider than the centers of the posts setting in the bridge, but don't look as far off if i just try and center in the post holes on the body.