The JK-1 was completed this weekend, and has had some good playing time. The issue was with the pickup, but they replaced it, and the new one works great. I still have to drill the strap button holes, but I've got a cliplock strap on the way, so I'm going to wait and drill the holes to match those screws instead of the ones that I have. The guitar is not perfect by any stretch of the imagination, but it's comfortable and sounds good. It's better than it has any right to be from a first build. Hopefully I'll have some sunshine later this afternoon to get it out and get photos to post tonight or tomorrow.

Now turning attention back to the MM-1 that I've been stalled on because I was reluctant to re-drill the neck holes. I plugged them and re-drilled last week, and luckily got them pretty straight without a drill press. I've got to buff up the finish on it and do the oil and wax treatment on the neck, then it should be ready for assembly, too. The Floyd install should be fun on that one.

Also working on a third non-PBG build/re-build of a BC Rich Warlock that I picked up for about $50. Looking to turn it into another '80s monster. Currently sanding it down again because of some problems with my first attempt at the paint job. The first sand-down was a nightmare because the original finish on the thing was almost bulletproof. This one's going much easier.