Not yet. I've now bought the materials to make up the basic jig to hold the body in and provide a flat surface for the router to sit on, but haven't put it together yet. I was working on the headstock yesterday as I needed to drill my own tuner holes. As the factory holes were normally a bit wonky, I asked for an undrilled headstock, which also let me choose the tuners I wanted without worrying about whether the standard holes were too big or small. The Hipshot tuners I ended up with require a 17mm hole, which is quite large.

However, after drilling small pilot holes I simply couldn't find the set of forstner bits I'd bought a couple of weeks ago (I was being forced to tidy up by the wife, mutter mutter). So I've had to order another set which should turn up later today. So at least I'm making some progress on it.