Results 1 to 10 of 154

Thread: cork sniffers resonator project

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 24-04-2018, 03:43 PM #1
    cork sniffer
    cork sniffer is offline
    Member cork sniffer's Avatar
    Join Date
    Dec 2015
    Location
    South Coast NSW
    Posts
    348
    Quote Originally Posted by Singing Frog View Post
    it has a resonator that will resonate regardless of any connection to an amp and a hollow body that will no doubt give is some acoustic properties
    Have you checked the depth of the cutout for the cone?
    Both FrankenWashie and I have (been forced) cut the bottom out of the main body timber exposing a cavity between said timber and the ply back. This increase in volume should help acoustically.
    EDIT, compare photos in post #10 and #25.
    Last edited by cork sniffer; 24-04-2018 at 03:46 PM.
    Reply With Quote Reply With Quote
  2. 26-04-2018, 07:35 AM #2
    Singing Frog
    Singing Frog is offline
    Member Singing Frog's Avatar
    Join Date
    Apr 2018
    Location
    Eden Hills S.A.
    Posts
    32
    Quote Originally Posted by cork sniffer View Post
    Have you checked the depth of the cutout for the cone?
    Both FrankenWashie and I have (been forced) cut the bottom out of the main body timber exposing a cavity between said timber and the ply back. This increase in volume should help acoustically.
    EDIT, compare photos in post #10 and #25.
    Yes will go this way as well, I think this is what is meant to happen..
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules