The Realparts (The Good)
The attempted template (The Bad)
The result (The very ugly)
If nothing else it reinforces to me that while I might think I can do everything, sometimes it’s just a lot less painful to have others do it.
Sent from my iPad using Tapatalk Pro
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Originally Posted by FrankenWashie
The Realparts (The Good)
The attempted template (The Bad)
The result (The very ugly)
If nothing else it reinforces to me that while I might think I can do everything, sometimes it’s just a lot less painful to have others do it.
Sent from my iPad using Tapatalk Pro
So we have all the requisite holes, bar the five way switch slot. My existing SD AL2 pick up fits through all the pup slots and the holes line up. Most importantly the pup adjuster holes line up.
I’ve got to get the edge chamfer sorted yet, and I’ve figured out a way to do that so we’ll test that tomorrow before starting on the scratch plate. If I can get that done, then we’ll matte it off and see if we can live with it.
Sent from my iPad using Tapatalk Pro
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Reply With Quote
