Yesterday, I attached my logo that I have been working on, I really am crap with computers, then gave it a coat of clear to seal it in.
This morning I installed the machine heads and put the strings on, I must say that I have never seen a Floyd Rose trem in person and what a pain it was to adjust. Every time I tuned the guitar, the bridge would lift way too high. Thank goodness for mr.Google, I found that all I had to do was to change the spring set up in the back cavity to put more pressure on the bridge from behind, I had already tightened the screws on the claw that holds the springs, till there was very little adjustment left and didn’t want to lose all adjustment so I moved the springs from the outer claws, to inner claws .
Reply With Quote