Simon. I have read a number of your posts and build diary. Clearly you have a great deal of valuable experience and have built similar guitars to my Gretsch Falcon build. I have a question to ask you. The bottom of the inside of the neck pocket has been routed in a really rough way. I see this in a number of the build diaries. I appreciate that this is critical in setting the neck angle accurately and can't be sanded too enthusiastically as it might compromise that angle. However, I feel that I might get a neater fit on the neck if it was levelled a bit. I have favoured the side of caution and ONLY used a very fine grade sand paper. 400 so far for about 3-4 hours. My body is pretty good when it arrived. It's had a thorough sand with the 400 and I am now moving onto the 1200 grade. I feel as if this should be enough but Dingo Bass recommends extensive fine sanding. Define extensive... Thanks again for all of your input into this forum.