Ouch. That hurts just looking at it.
Ouch. That hurts just looking at it.
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Been playing with logos for the headstock on this. It has a basic black logo on the front, but I want something else on the rear. A bit more branding.
I've been fiddling with this as a tester.
Its just a variation on the Hex W logo i've been using, not sure i I'll run with it or not. I may need to adjust it all to run lengthwise to fit properly on the Headstock face. But like I say a work in progress.
Last edited by FrankenWashie; 18-03-2018 at 10:57 AM.
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
How about "You're saying that I put an abnormal brain into a seven and a half foot long fifty four inch wide Gorilla?"
Wait, probably a tad long.
cheers, Mark
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
FrankenLab:
Turning tone wood into expensive sawdust since 2016!
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"