Originally Posted by JohnH
No worries, take your time cause it is a bit hard to understand at first, I went through the same learning-process when I first started out in electronics.
No worries, take your time cause it is a bit hard to understand at first, I went through the same learning-process when I first started out in electronics.
Yeah, it's pretty mind bending. My brother summed up my feelings perfectly at a gig a few months back - we were both pretty drunk and standing at the side of the stage and apropos of nothing he just kind of shrugged, shook his head and exclaimed 'but what even IS electro-magnetism?!?'
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
Scientists have theorized about what Electro-Magnetism is, but personally I think we are barely scratching the surface with our current understanding.
Very good, Doc.
Don't forget that as you increase the voltage, it becomes more dangerous to mess about with. You need to be sure that all your wires and components are suitably rated for that voltage. Each component in the multiplier might not have a large voltage across it, but the voltage with respect to ground is increasing with each step.
Last edited by Simon Barden; 26-01-2018 at 05:06 PM.
Very good, Doc.
Don't forget that as you increase the voltage, it becomes more dangerous to mess about with. You need to be sure that all your wires and components are suitably rated for that voltage. Each component in the multiplier might not have a large voltage across it, but the voltage with respect to ground is increasing with each step.
Good point, and you're right about that...pun not necessarily intended but it did work out pretty well in the end I must say.
Last edited by DrNomis_44; 26-01-2018 at 05:34 PM.
Posting Permissions
Reply With Quote