Quote Originally Posted by Sonic Mountain View Post
Be careful of the edges around the cavities - it is super easy to break through on a hard edge when cutting back. I would go so far as to mask it and about 2mm onto the body. Buffing will even it out pretty quickly.
Ah, good thinking - it has been a pain I have to admit. Because I've been using TO with stain mixed in I've been 'getting around it' by putting down a few coats between each go with the sandpaper, which so far has worked to build up enough colour to cover the areas where I've gone through. The problem of course is that then the stain is only suspended in a few thin coats of oil and I just end up going back through it lol.

Will mask it better tonight.