Body ready for sanding back and sealing.
I will check the colour when it is dry luckily the dark wood will be under the black feathered edge.
Body ready for sanding back and sealing.
I will check the colour when it is dry luckily the dark wood will be under the black feathered edge.
1: FV Circa 1975 Total build from scratch fret board the lot Design out of an Electronics mag. RIP
2: FS Candy Red on Gold Basecoat.
3:Finished Build: LP Custom 3 pickup Black Silver Burst.
4:Current Build SGM-1 Electric Guitar Kit (Mahogany) Going for a nice wood stain effect.
5:Current Build P Bass Electric Guitar Kit (Ash) Going for a nice wood stain effect.
6:Current Build ES-3 Electric Hollow Body Guitar Kit (Sunburst) Going for a nice wood stain effect.
Sealed and drying now before I start the paint process.
1: FV Circa 1975 Total build from scratch fret board the lot Design out of an Electronics mag. RIP
2: FS Candy Red on Gold Basecoat.
3:Finished Build: LP Custom 3 pickup Black Silver Burst.
4:Current Build SGM-1 Electric Guitar Kit (Mahogany) Going for a nice wood stain effect.
5:Current Build P Bass Electric Guitar Kit (Ash) Going for a nice wood stain effect.
6:Current Build ES-3 Electric Hollow Body Guitar Kit (Sunburst) Going for a nice wood stain effect.
So almost ready for the clear the neck is finished the body needs a little more work.
the back is the same colour as the front It also looks more orange than in the image I applied another coat of stain to get the rich grain effect. I will see if it is dry enough to coat in the morning, It will be good if I can spray it before I go on leave for a week or so.
Last edited by DaveC64; 21-12-2017 at 08:43 PM.
1: FV Circa 1975 Total build from scratch fret board the lot Design out of an Electronics mag. RIP
2: FS Candy Red on Gold Basecoat.
3:Finished Build: LP Custom 3 pickup Black Silver Burst.
4:Current Build SGM-1 Electric Guitar Kit (Mahogany) Going for a nice wood stain effect.
5:Current Build P Bass Electric Guitar Kit (Ash) Going for a nice wood stain effect.
6:Current Build ES-3 Electric Hollow Body Guitar Kit (Sunburst) Going for a nice wood stain effect.
Looking nice Dave
Black burst looks top shelf
RedPine Lapsteel - March 2017
http://www.buildyourownguitar.com.au...hlight=redpine
JB4-A - March 2018
http://www.buildyourownguitar.com.au...ead.php?t=8006
Gorgeous stuff on the burst. This is going to be a killer bass!
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
coming along nicely
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Looking most excellent! Which/What pickups & electrics are you going to install?
Posting Permissions
Reply With Quote