Hey Franky looking sweet mate nice job on the stripes. If there are slight ridges between the join lines I would give it a light wet sand with at least 1200 grit paper. The clear coats will level off after 3 or 4 coats of clear.
As long as you have enough colour coats built up.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
