Korean kit arrived yesterday so unboxed and will give a bit of a run down.
The neck is one piece Mahogany with paddle headstock and not a bad bit of timber and well finished.
Paddle is generous and has 95mm width before the additional wings so a lot of latitude for headstock designs. Headstock has a thin flame veneer with not bad figure.
Radius is 12” neck tilt 15 degrees and the scale is 24.75”.
Fretboard is ebony and smooth with some variation in colour and has 6mm paua/ green abalone fret markers. Frets are installed well but sharp edged from machining and need a quick smooth.
Supplied Nut is plastic
1st 12th 16th
Neck thickness 20mm 24mm 26mm
Width 42.5mm 51.8mm 54.8mm
Reply With Quote