Imagining the Ocean. Thibault's first build!

[Thibault]

Use Goof Off for the glue spots. Works well but you might just need to use some extra stain on those areas. No big problem.

Yes! This was my instinct as well but I'm uncertain how it will turn out. The plan is to use violet with some black thrown in it.

[Kick]

Personally I would have had a problem with that veneer not joining as it should be. Good that you managed to 'fix' it but I would have contacted Adam before doing any repairs like this.

[phrozin]

I agree with kick that's a decent gap there, some of the kits around are not great for what they cost some of them with 4 pieces of wood which are totally different that's why i don't do dye finish very often unless there a close match it looks off imo.

[Thibault]

Personally I would have had a problem with that veneer not joining as it should be. Good that you managed to 'fix' it but I would have contacted Adam before doing any repairs like this.

Yeah. It's unfortunate. The "fix" in the center isn't mine. It came like this from the factory. Also this kit was from a European DIY kit distributor, not Pitbull, so no problems there
The positives were that I didn't have to pay customs and thus saved a few bucks.

I should've just ordered the DM-1S

But yeah, challenges are fun.

[Thibault]

I agree with kick that's a decent gap there, some of the kits around are not great for what they cost some of them with 4 pieces of wood which are totally different that's why i don't do dye finish very often unless there a close match it looks off imo.

My ES-2V has 3 pieces. Still looks great

[PeterSik]

you could make a "feature" out of that stripe in the middle... as in actually paint a stripe over it making it look like it was your intention all along.. maybe even do another couple of stripes..

[Thibault]

you could make a "feature" out of that stripe in the middle... as in actually paint a stripe over it making it look like it was your intention all along.. maybe even do another couple of stripes..

Nice idea! So... maybe non-transparent/semi-transparent centerline and then the transparency increases as we get closer to the edges?

[Thibault]

I spent some time looking for inspiration. These are pretty close. Although I don't want the burst to be that light on the edges and also that kind of sanded finish is impossible to achieve with veneer.



Wish me luck!

[Kick]

Yeah. It's unfortunate. The "fix" in the center isn't mine. It came like this from the factory. Also this kit was from a European DIY kit distributor, not Pitbull, so no problems there

Good to hear that this was not a PBG kit