Hey Joe, the hot rails single pickup is coil splittable, so if you don't want to split the coils, then connect the black and white wires to the switch and ground and the red and green wire just put some insulation tape over them. So you should get both rails working and 8k ohms resistance
Last edited by wokkaboy; 04-09-2017 at 01:56 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote