Layout - layout - layout....

A huge headache has developed. My brain is hurting...

I wired the input jacks and started installing components around V1...all good.. tight...but all good.

Hmm... The HT on V1 has gotta come from somewhere!... Hmmm... Vox in their wisdom use separate HT drop down resistors and HT filter caps for each stage whereas Marshall cascade the HT on each stage with the highest on V3 and dropping down in voltage to V2 and with the lowest HT voltage on V1. So in a Marshal (and most other brands) it is a chain but in a Vox (and Hohner) it is a star arrangement.

I've got all the needed caps... no problem....
Where to put the caps and various dropping resistors so the are reasonably close to their respective tubes and I don't have dozens of wires carrying top end HT all over the place.....In the tiny little space that is my amp ...Big headachey problem.!!!...