Results 1 to 10 of 45

Thread: GR-1SF build

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    nice looking build Max. Has it taken you 5 days to complete the build ? If so big slap on the wrist, the tru oil is probably still curing
    Last edited by wokkaboy; 04-08-2017 at 05:06 PM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #2
    Member jmax's Avatar
    Join Date
    Jul 2017
    Location
    Oxford, UK
    Posts
    106
    I started the whole process on the 21st of July - I've only been posting over the past five days, so I guess it gives the impression that I've been going faster than I actually have been. I just haven't had enough time to post as I complete each step.

    I used three coats on the neck, four on the body, with 24 hours between each coat. Then a couple days of curing. Just enough of a finish to give a bit of sheen, but the grain still shows through - I'm not going for glass, and I fully expect to keep touching it up over time.
    Last edited by jmax; 04-08-2017 at 05:54 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •