Marcel, you may be able to carefully sand off the poly without sanding through the veneer and re-stain it. Worth a go if the hardware doesn't hide the lighter areas.
Marcel, you may be able to carefully sand off the poly without sanding through the veneer and re-stain it. Worth a go if the hardware doesn't hide the lighter areas.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
