Page 19 of 20 FirstFirst ... 9 17 18 19 20 LastLast
Results 181 to 190 of 192

Thread: Rev's MK-2 Build

  1. #181
    GAStronomist Simon Barden's Avatar
    Join Date
    Oct 2016
    Location
    Reading, UK
    Posts
    10,547
    You could always give the back of the neck a light sand or rub-down with some wire wool. Should make it feel smooth and you'll get less reflections.

  2. #182
    Member Rev's Avatar
    Join Date
    Oct 2016
    Location
    Knoxville, USA
    Posts
    147
    We'll see. We have overhead lights in the practice space (which, being a TV guy, I hate), but venues usually have cans on flood and maybe some fills in the back. So I doubt I'll have the same problem.

  3. #183
    Member Rev's Avatar
    Join Date
    Oct 2016
    Location
    Knoxville, USA
    Posts
    147
    Click image for larger version. 

Name:	practice.jpg 
Views:	141 
Size:	216.5 KB 
ID:	20177

    From practice.

    Really tempted to do another one based on what I learned/relearned here, but I think Id better practice my finishing on scrap wood a bit more before doing that (my job isnt bad at all, but I think theres room to improve).
    Last edited by Rev; 23-06-2017 at 05:01 AM.

  4. #184
    Overlord of Music Dedman's Avatar
    Join Date
    Mar 2016
    Location
    The "Fabulous" Gold Coast
    Posts
    3,566
    very very nice Rev, starting on mine today
    Build 19 PSH-1 Kustom
    Build 18 HB-4S Kustom
    Build 17 WL-1 Kustom
    Build 16 TL-1TB Kustom
    Build 15 PBG-2-
    Build 14 FTD-1
    Build 13 RD-1 Kustom
    Build 12 DM-1S
    Build 11 MKA-2 -
    Build 10 Basic strat
    Build 9 JM Kustom
    Build 8 FV-1G
    Build 7 ES-2V
    Build 6- Community prototype
    Build 5 LP-1LQ
    Build 4 ES-5V
    Build 3 JR-1
    Build 2 GD-1
    Build 1 TLA-1

  5. #185
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    looks great Rev, how does it sound and play ? Don't stress about the paint job, takes years of practice and expensive equipment and paint booth to get a smick paint job
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  6. #186
    Member Rev's Avatar
    Join Date
    Oct 2016
    Location
    Knoxville, USA
    Posts
    147
    Well, to be exact, the paint work I did turned out pretty nice. My buffing leaves something to be desired though - I thought I did a pretty good job at the time, but the polish isnt quite as glossy as it should be. But thats less noticeable with a bright color, so I've got no plans to attempt going over it again.

    Otherwise, once I worked on the neck and bridge setup a little more, it became nicely playable. The pickups are weak and somewhat dull sounding, but boosting my overdrive a little harder than normal helped somewhat in that area. Enough for live work anyway. Ill probably still drop something with more power into the bridge pickup slot. Its not imperative at the moment, just something I should check into down the road and see if its an improvement.

  7. #187
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    Good see it finally finished. Know what you mean about weak stock kit PUP's but any better would push kit prices out of reach for some folk plus it allows for some personalised customisation.
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  8. #188
    Member Rev's Avatar
    Join Date
    Oct 2016
    Location
    Knoxville, USA
    Posts
    147
    The funny thing, Waz, is that my fussy bandmates actually like the sound of the neck minihum a LOT. Though it has its limits, theres a warmth to it that mixes well in a live situation. Theres a couple of tracks in our set that it doesnt perform well on, but I always have two guitars with me at a show anyway. Hardly an inconvenience to switch out here and there.

  9. #189
    Member Rev's Avatar
    Join Date
    Oct 2016
    Location
    Knoxville, USA
    Posts
    147
    BTW, I found a really good deal on a used DiMarzio SDS1 and put that in at the bridge. Its a darker-sounding pickup, but it allows just enough of a power boost that I can switch it on for those moments when I need the extra gain.

  10. #190
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    The Dimarzio was probably all it needed to get rid of the whimpiness.
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

Page 19 of 20 FirstFirst ... 9 17 18 19 20 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •