good work Hoby, I have the same 4 x 10 Hartke cab and then found a cheap 1 x 15 cab so it makes the house shake nicely ahha
what head you got powering it ? I got the Hartke 350 watt head.
good work Hoby, I have the same 4 x 10 Hartke cab and then found a cheap 1 x 15 cab so it makes the house shake nicely ahha
what head you got powering it ? I got the Hartke 350 watt head.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I have a Peavy Megabass Head. It's a Rack mount 2x200W Biamp capable Beast. I bought it New in the early Nineties and absolutely Love It. It also has a sweet onboard Chorus that only works on the "Top Speaker" so if you're biamped, it only choruses the highs and the bottom end stays clean and solid. In Full Range, you get a Chorused Speaker and a Dry Speaker.... almost stereo....Originally Posted by wokkaboy
It also has "Power Sharing" so if one Power amp is not working hard, the other can draw more current as required and will run well above rated power output.
I think it will make this Quad Box Sing..... although I hope the Horn can match the sweetness of the Boogie Bullet in my current top box.......
It normally runs a Carvin/Boogie based 2x10 and an EV15. when you play the low B string, everyone in the Venue gets Dirt in their Hair...... so a Quad plus a 15 , well, the mind boggles.....
Last edited by Hobastard; 03-07-2017 at 04:09 PM.
I would never join a club that would have a member like me.....
Posting Permissions
Reply With Quote