I've received my micro-mesh kit from the Sandpaper man. I have done a 1200, 1500, 2000 grit paper, then 4000, 6000, 8000, 12000 micro mesh on my scrap piece of wood. It is seriously shiny.



Comparison of the clear coat guitar before sanding, with the scrap bit after micro mesh. Bonus points if you can work out the brand on the hat I'm wearing.



Have to say, I struggled to work out which micro mesh was which. The 'teal' and 'royal blue' both looked like teal to me. They are obviously different colours, but comparing them to the sheet with the colours on it, I could match it either way, depending on the lighting conditions. In the end I found a photo online (Stew Mac website I think), which had the pads laid out in order, and that finally sorted it for me.