Thanks Gav.. that was my first time using poly and I sprayed it light coats with about an hour and half between coats with light sanding between. I did 6 coats then let sit for 2 days and level sanded and then started over with a little heavier coats with sanding between. Then I level sanded and wet sanded going up to 2000. I used Naptha instead of water. Then I used 3000 grit on a drill attachment and that really gave a pretty good finish. I waited almost a week and used 3m finesse it to cut the finish further followed by zymol wax and buffed with buffing pad on the same drill attachment. I think I am going to build a buffer. I had to replace my heat pump so I kept the blower motor. I think I can use it to build a double head buffing station. I know you probably know all this stuff looking at your builds but just thought I would share for some newbies like me.
Love you build Gav..