Hello again!
So no primer for me today. It's a bad day for painting today in greece (too much wind) and since i've got an open garage i left it for today and decided to do some more sanding as the pro's said (sand sand and then sand some more). Which actually helped a lot!
So before start sanding again today, i used a damped cloth first in the body to help me see any missed spots. And i saw one spot that i though i've done right but it turns out i missed it.
This is from the back of the body and it's a joint with a glue stain. I've sanded it yesterday and seemed ok. But today with the damped cloth i reallised there was a lilltle bump you could feel by hand. So more sandingthere with 320 grid. Now the bump is gone and it's smooth.
But it seems like there is some glue left there. Can't feel it by touching but it's there. And it seems like it's a bit deep inside.
Will this glue give me any issues when start finishing or after the primer i'll be ok??
Last edited by George Koleventis; 06-05-2017 at 06:48 PM.
Reply With Quote