Quote Originally Posted by CascadiaGuitarGeek View Post

So before EMG started releasing their pickups with metal covers, James had a set of EMG 81/60s modified to look like vintage gold PAF humbuckers. This isn't as easy as it seems, since the EMGs have an epoxied on plastic cover that is larger than the inside dimensions of a standard humbucker cover. The solution I've seen on other forums is to sand/grind back the stock covers to fit inside the humbucker covers. Then cut the heads off some pole piece screws and epoxy them into the holes in the new cover. We'll see if I can do this without wrecking the whole lot.
Hey mate, have you considered painting the EMG covers in the same way you're doing the iron cross?
some gold and clear should get you pretty close.