Hannah must go!

[ILRGuitars]

Man ILR that turned out really nice. That color looks great and glad you didn't have to sand all the way back to bare. How did you make the logo sticke. I need to make one to put on my first build and have seen people use the water transfer paper, is that what you did?

Dead easy. I used some ink jet transfer paper. I finished the headstock up until the final clear coats.

I made the design to scale using Microsoft Publisher then printed onto the paper. Cut out the rough shape, two coats of clear lacquer to seal in the ink, then let it dry. Cut the final shape, wet the headstock slightly, soak the transfer, slide it onto the headstock, align and smooth out any bubble etc. Let it dry the applied the final coats of lacquer it the headstock. Easy peasy.

I cut the final shape to cover the whole of the white area to help disguise the transfer paper. With the clear coats over the top, you can hardly notice it.

[Simon Barden]

Really nice-looking guitar now, ILR.

All it needs now are some Hanna Montana stickers and it's good to go!

[wazkelly]

You are wicked Simon.

Top job ILR. Love the choice of colour as it really suits the style of axe.

Cheers, Waz

[ILRGuitars]

Thanks for the positive comments guys.

Oh, Simon....you're a dead man walking.

[Brendan]

In case you can't find the logo - here's one for you. I hear if you print it to ink jet transfer paper you can just stick it on!

[Simon Barden]

Join the DMW club, Brendan!

[Brendan]

Join the DMW club, Brendan!

I like to help my fellow forumites...

[phrozin]

Thats a real nice build there fella

[JohnH]

She picked a great colour. Looks 4000% better than before

[ILRGuitars]

Thanks guys.

Oh Brendan....Congrats, you just made #1 on my Most Wanted list.