It is finished, but an issue or two

[wokkaboy]

Hi Steve, you probably have to resize the photo's to maximum 1500x1500 resolution and below 1MB in size, try that or you can upload to photobucket or similar and post a link in your reply,
I just saw your edited post with a list of issues. I would PM one of the guys who have built the same model, Dedman and AndrewOsborne come to mind and see how the action is on their builds. Getting the neck glued to the correct angle (flush in the pocket) is critical to the string action and bridge settings.
Did you do a mock build with the strings and neck clamped before you glued it ?

with Mr Sheen would depend on what finish you have used. Most people use an automotive cut and polish for the final polish, but Mr Sheen may work