I would hesitate at the omission of the tone pot as well; how do you find the sweet tonal spot without the pot? I don't see any advantage in a setup like this - I used a volume pedal as well when I was gigging and left the guitars volume at about 95% as I believe that the things got to be running flat out to get full benefit of the pickups, but I didn't want to lose any flexibility.
YMMV, of course....
"If it's Blues music in a bar and it helps people swallow their drink of choice, or it's a dance song and people get up off their chairs and shuffle their feet, or it's a Jazz tune and the Chardonnay tastes so much better... then it's all good."
- Marcel
I agree, im only looking at it to replace a 5 way slide switchOriginally Posted by corsair
I would hesitate at the omission of the tone pot as well; how do you find the sweet tonal spot without the pot? I don't see any advantage in a setup like this - I used a volume pedal as well when I was gigging and left the guitars volume at about 95% as I believe that the things got to be running flat out to get full benefit of the pickups, but I didn't want to lose any flexibility.
YMMV, of course....
Fender electric Fat Strat mim. (Bought)
Maton Electric Acoustic EM325C
Pitbull Guitars ST-1 ( finished) http://www.buildyourownguitar.com.au...ead.php?t=5970
Pitbull Guitars SG-2 ( Finished) http://www.buildyourownguitar.com.au...ead.php?t=6124
Pitbull Guitars JM-1 (Finished. 2018 June GOTM))http://www.buildyourownguitar.com.au...ead.php?t=7150
Pitbull Guitars TL-1 (In production) [url]https://www.buildyourownguitar.com.au/forum/showthread.php?t=8676
Posting Permissions
Reply With Quote