Hi Jack, yes those machine marks look fairly deep on the bottom edge. I suggest start at 120 grit then work up till about 320 grit should be enough
Hi Jack, yes those machine marks look fairly deep on the bottom edge. I suggest start at 120 grit then work up till about 320 grit should be enough
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote