Nah, it would just look like an undercoated incomplete axe. This one deserves a nice shiny finish.
Nah, it would just look like an undercoated incomplete axe. This one deserves a nice shiny finish.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
I agree Waz, Matt White would collect handprints like Fifty Cent collects Bullets.......
All good this one will be shiny! I was just thinking about another plan for something else...
Current Projects
#Planning 5 String Bass
Looking very smooth! Nice job and a matte finish would be a good idea.
Nr 1: Red Widow LP-1MQ (Finished) ->Diary<-
Now looking great, Andrew. Well worth the extra effort.
A small update.. You probably won't be able to see any difference in this photo but the corner below control route had an annoying 'bump' that was only ever so slightly visible at certain angles. It would have been amplified by clear coats so out with the sanding paper. The corner was smoothed back to the wood then re primed. I'm now happy with the primer and finally ready for finish coats.
Sent from my Moto G4 Plus using Tapatalk
Current Projects
#Planning 5 String Bass
Your inspiring me to get a move on with my Bass!
I didn't realise how roughly cut it was...I had to break out the 60 grit just to try and get the edges even
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
So finally back to this project...
I wasn't happy with the neck finish so have applied numerous coats of Tru Oil to shine it up a bit more. Here is the result before cut/polish
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
And undercoat finally complete after a bit more patching up
Sent from my iPhone using Tapatalk
Current Projects
#Planning 5 String Bass
Posting Permissions
Reply With Quote
