Hey Zandit, the ferules are pressed in but they have about a 1mm thick lip that sits ontop of the body surface.
I think they look super sexy, think about a string through for a future build
Hey Zandit, the ferules are pressed in but they have about a 1mm thick lip that sits ontop of the body surface.
I think they look super sexy, think about a string through for a future build
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I'm going to be using them on my Silent guitar build. I'm just a little worried about drilling the thickness of my body which needs to be wide enough to handle the acoustic pick up. I have access to a drill press at work which will make it easier.Originally Posted by wokkaboy
I'm also wondering what to do with the top of the body. Since I'm using an acoustic bridge to take the Piezo UST(Under Saddle Transducer) do I use ferrules top and bottom on the body?
Sorry for the thread jack Dave!
Acoustics:
1995 Maton EM725C - Solid 'A' Spruce Top, QLD Walnut B&S, AP5 Pickup
2015 Ibanez AEL108MD-NT - Laminated Spruce top, Laminated Mahogany B&S, Fishman Sonicore Pickup
Electrics:
Pitbull LP-1S - http://www.buildyourownguitar.com.au...ead.php?t=5745
Carsen Superstrat Rebuild - http://www.buildyourownguitar.com.au...ead.php?t=6284
Builds in Progress:
Silent Guitar Semi-Scratch Build - http://www.buildyourownguitar.com.au...ead.php?t=6809
Wot Woks sed
Posting Permissions
Reply With Quote