Results 1 to 10 of 290

Thread: Silent Guitar Scratch build ideas

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    ok Zandy you still have all of us in suspense what mods to the headstock you are doing and why a thicker veneer must be used
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #2
    Mentor Zandit75's Avatar
    Join Date
    May 2016
    Location
    Penguin, Tasmania
    Posts
    1,617
    Quote Originally Posted by wokkaboy View Post
    ok Zandy you still have all of us in suspense what mods to the headstock you are doing and why a thicker veneer must be used
    Alright, I'm shocking at keeping a secret!!
    Woks, as I said you were close, but still off by a little.
    This is the idea I have in mind....


    I need the thicker head stock to be able to place the tuners on the sides, and still have enough meat to hold the locating screw.
    Acoustics:
    1995 Maton EM725C - Solid 'A' Spruce Top, QLD Walnut B&S, AP5 Pickup
    2015 Ibanez AEL108MD-NT - Laminated Spruce top, Laminated Mahogany B&S, Fishman Sonicore Pickup


    Electrics:
    Pitbull LP-1S - http://www.buildyourownguitar.com.au...ead.php?t=5745
    Carsen Superstrat Rebuild - http://www.buildyourownguitar.com.au...ead.php?t=6284

    Builds in Progress:
    Silent Guitar Semi-Scratch Build - http://www.buildyourownguitar.com.au...ead.php?t=6809

  3. #3
    GAStronomist FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    5,666
    Quote Originally Posted by Zandit75 View Post
    Alright, I'm shocking at keeping a secret!!
    Woks, as I said you were close, but still off by a little.
    This is the idea I have in mind....


    I need the thicker head stock to be able to place the tuners on the sides, and still have enough meat to hold the locating screw.
    WHOA NELLY! Wow, I am DEFINITELY getting the popcorn ready for this one! That's a great challenge. Really looking forward to seeing how this pans out.
    FrankenLab
    Hand crafting guitars, because Death Rays are expensive.


  4. #4
    Mentor Zandit75's Avatar
    Join Date
    May 2016
    Location
    Penguin, Tasmania
    Posts
    1,617
    Quote Originally Posted by wokkaboy View Post
    sounds good Zandy. I presume you will be gluing the veneer to the bottom so you keep the same string break angle from nut to tuner posts. Have to check out how all the string angles will work once you have the neck.
    Actually because the tuner posts are much lower than traditional ones I don't think it would matter if you glued about 3mm to the top and 3mm to the bottom.
    Yep, I was planning on laminating top and bottom. I ordered that neck tonight that I posted from ebay earlier, so I guess I could actually do something similar to what I have shown in the sample. The only main difference I will have from the photo above will be the truss rod hole and cover. As the tuners will be slightly further away from the nut, the break angle will be reduced a little.
    Hopefully with the removal of some material, it will offset the added weight of the laminates. I don't want a neck heavy guitar!

    Quote Originally Posted by FrankenWashie View Post
    WHOA NELLY! Wow, I am DEFINITELY getting the popcorn ready for this one! That's a great challenge. Really looking forward to seeing how this pans out.
    I need the Triple buttered Popcorn, nuke some for me will you!!
    Acoustics:
    1995 Maton EM725C - Solid 'A' Spruce Top, QLD Walnut B&S, AP5 Pickup
    2015 Ibanez AEL108MD-NT - Laminated Spruce top, Laminated Mahogany B&S, Fishman Sonicore Pickup


    Electrics:
    Pitbull LP-1S - http://www.buildyourownguitar.com.au...ead.php?t=5745
    Carsen Superstrat Rebuild - http://www.buildyourownguitar.com.au...ead.php?t=6284

    Builds in Progress:
    Silent Guitar Semi-Scratch Build - http://www.buildyourownguitar.com.au...ead.php?t=6809

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •