Now that the neck is fixed in place, everything now needs to line up with the neck. This will stop strings drifting off towards the edge of the fretboard. A check with straight edges shows the neck is aligned spot on with the join in the sides at the end of the body. Careful measuring and a sharp pencil re-establishes a centre line to locate the pickups. The original holes are too small for the Thunder'Tron pickups and are also slightly off centre. Masking tape gives a clear surface that shows the pencil lines. How to now cut out the holes?Click image for larger version. 

Name:	DSCN3106 (1024x768).jpg 
Views:	190 
Size:	360.8 KB 
ID:	17139Click image for larger version. 

Name:	DSCN3107 (1024x768).jpg 
Views:	168 
Size:	354.3 KB 
ID:	17140