Results 1 to 10 of 164

Thread: Toshi's first build: PBA-4

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    original headstock shape Toshi looks pretty cool. I'd probably do a bit more sanding to get the curves flowing and try and eliminate any rounded edges that aren't round, if you understand what I mean. Sorry buddy but you will be a sanding expert after this build hhaa
    Another thing you can do is place the headstock over the body shape and I try and emulate some of the curves of the body and horn shapes.
    You have done a good job with limited tools and I assume in a small apartment where you can't create too much dust without upsetting the wife !
    Last edited by wokkaboy; 12-01-2017 at 08:37 AM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •