New "Options" Test

[adam]

So, as I have no life, on Boxing Day, during the inevitable Melbourne rain delay, I starting messing around with our E-store software to see if I could get a user-friendly upgrade system happening on one of our products... as a test. I picked the TLA-1Q; Ash body, quilted maple veneer, TL kit. Check it out:

http://www.pitbullguitars.com/shop/g...quilted-maple/

Please have a play and let me know what you think. Is it intuitive? Any problems? Anything missing?

If you can have a look on you phone or pad too... I did a lot of work to make sure it made sense on a phone.

If we can get this one right then we can add these upgrade options to most of our kits.

Thanks in advance for your input.

[dave.king1]

G'day Adam,

This is timely as I am very close to pulling the trigger on this one for my Merle Haggard Tuff Dog tribute, with the same options the price is up on what it was this morning when I optioned it up so I'm not sure if the actual prices have changed or the maths are wrong somewhere.

My spec is
TLA-1Q
22 fret maple neck
Gold hardware
Tonerider Hot Classics $86.63 ( were $89.00 )
White Pearloid Pickguard

I didn't itemise the rest but the automated total previously came to $358.95 and now $380.32, not a huge difference but maybe something is not quite right or was wrong before.

My question before pulling the trigger is about the neck profile and radius, is it the same as the STA-1 if so I am in.

I have a built Tele kit from another Australian supplier that I finished years ago and the fretboard is almost flat and I just can't bond with it and it will be going to a new home in the near future

[adam]

G'day Adam,

This is timely as I am very close to pulling the trigger on this one for my Merle Haggard Tuff Dog tribute, with the same options the price is up on what it was this morning when I optioned it up so I'm not sure if the actual prices have changed or the maths are wrong somewhere.

My spec is
TLA-1Q
22 fret maple neck
Gold hardware
Tonerider Hot Classics $86.63 ( were $89.00 )
White Pearloid Pickguard

I didn't itemise the rest but the automated total previously came to $358.95 and now $380.32, not a huge difference but maybe something is not quite right or was wrong before.

My question before pulling the trigger is about the neck profile and radius, is it the same as the STA-1 if so I am in.

I have a built Tele kit from another Australian supplier that I finished years ago and the fretboard is almost flat and I just can't bond with it and it will be going to a new home in the near future

Thanks Dave, yes, we'll need to play with the pricing more. It actually have worked out a bit cheaper, so I'm not sure what's up there.

All our necks are 12" radius and 'Modern C' profile, 43mm at the nut.

[dave.king1]

Thanks Dave, yes, we'll need to play with the pricing more. It actually have worked out a bit cheaper, so I'm not sure what's up there.

All our necks are 12" radius and 'Modern C' profile, 43mm at the nut.

Thanks Adam, just ordered the kit.

The biggest uplift difference in the old quote and the new was the gold hardware being up $30.00 and I added the 22 fret neck as well

[adam]

Thanks for being a guniea pig for this new format. All came through this end ok, and, importantly, adjusted the stock.

The hardware does actually need to be more than it was in the old format, we were losing money when Gold HW was ordered. I will increase the discount though as $30 is too big a jump. I will also refund that $30 to you, as you were so helpful in testing this.

If you want a set of 6 ferrules, send me an email to remind me and I will include them at no extra charge.

Thanks Adam, just ordered the kit.

The biggest uplift difference in the old quote and the new was the gold hardware being up $30.00 and I added the 22 fret neck as well

[dave.king1]

I should add, the Tuff Dog has a few gold items that are different to the kit that I will have to source from OS, they being

6 Saddle string through bridge
String through ferrules
Circular string tree
Oval jack plate

So the equivalent kit items will become surplus but as I discovered when I upgraded my STA to black hardware the cost differential was minimal ( passed off the chrome & white stuff to my brother for beer )

[dave.king1]

Just looked on my phone and it's listed as follows

TLA-1Q $199.00 ( new price $199.00 )
Gold Hardware $39.00 ( new price 69.96 )
TR Hot Classics $89.00 ( new price 86.63 )
White Pearloid PG $12.95 ( new price 8.48 )
22 Fret neck $19.00 ( new price $16.95 )
Total $358.95 ( new total $380.32 )

Wife's iPad prices up the same as the PC @ $380.32

I think I'll order it off the phone thanks

[Simon Barden]

My default currency setting is for GBP. Whilst the top 'from £xxx' label displayed in pounds, the bottom running total was displaying in $. By changing the currency setting to A$ then GBP the bottom total then changed to £. Just a slight niggle but it should really display the correct currency first time.

Edit: just tried it again, and if no options are chosen, the bottom green running total box isn't shown. I feel it should really be shown all the time.

Also, if I reset an option like a rosewood neck back to no upgrade, the running total box disappears and if I then pick another option, it re-appears but reverts back to displaying in A$ again.

I tried selecting various options and the adding up worked for me (using A$) with all my selections. Conversion to GBP for the total was the same rate as for the 'from £xxxx' at the top, so no issues there.

[Simon Barden]

Just a thought driven by this exercise, but is it worth offering a set of rear-mounting string ferrules of the appropriate colour if you select a Wilkinson or Babicz bridge, as they are all string-through body types (unlike the standard top-loading bridge)?

[dave.king1]

Just a thought driven by this exercise, but is it worth offering a set of rear-mounting string ferrules of the appropriate colour if you select a Wilkinson or Babicz bridge, as they are all string-through body types (unlike the standard top-loading bridge)?

Just discovered the ferrules of all colours are listed in the extras under spare parts