Does anyone have recommendations on how to Seal a natural mahogany body and neck in satin
Does anyone have recommendations on how to Seal a natural mahogany body and neck in satin
Hi Nightrider welcome to the forum. What kit are you planning/or building ?
first thoughts are to sand the body/neck to about 320 grit, grain fill, wait to cure, sand to about 400 grit, then apply the satin finish. Going natural colour you could get a Dingotone colourless kit would do the job nicely
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
grain fill with timbermate that is.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Posting Permissions
Reply With Quote