Hi Zandit, if you haven't thrown away the tape you removed maybe you could pick some of the finish off and use super glue to attach that back on the body.

I know it is a really fiddly PIA type of job but where the offending tape joint lines were will be the bit of finish you need on the axe, not on the masking tape.

If taping up again maybe use a sharp blade or knife to cut the tape and define the edge when removing to prevent a similar thing happening again.

Another idea is to free hand spray lightly near areas that need a bit more coverage and not worry about taping up as you could easily scrape off or sand back any overspray in PUP cavities and neck pocket if required.