Well, looks like the colder weather has moved in. Did a bit of touch-up spraying yesterday with the rattle-can on that amber corner and a couple of edges, and the last spray went cloudy due to cold/moisture, so that had to be sanded back today.

I then did some more touching up on the corner and on the headstock using a brush, sitting in the sun for extra warmth, but it was far too cold in the garage for spraying. Unless we get an unseasonal warm spell, I may have to put everything on hold until spring here in the UK next year. I can do a touch more sanding down, then scraping the binding and then gluing the neck on, but that may have to be it. After that, even one warm day would give me enough time to get the clear coats on. Might just get lucky, but I doubt it. I should have started sooner!