Hi Ozzie, from memory your PBH was finished in DT CG? How did that work out as I had plenty of dramas with humidity and found steel wool just made things worse. In these parts it seems that a fine wet sand works better between coats rather than usual dry steel wool method.
If I was to use DT for a nude finish it would be done with the neck finish as it is harder and hopefully that also means less coats would be required. Less coats = lesser chance of the dreaded weather affected DT gremlins from turning up at your place.
Edit: J Bass wiring is not so good as you cannot fully wind one off without affecting the other PUP and you always seem to need a bit of the unwanted PUP slightly in the mix to keep the desired one sounding OK. Another thought is how often do you think you would use a tone control on the Bass part as you could run a separate volume on each PUP if you want to keep with that Jazz theme and then use one of the 3 way switches as a neck selector. That Real Tone mini DPDT switch is on-off-on and Weirdy can correct me here but I thought you would need one that does on-on-on.
Reply With Quote