The PBG B46.....Behemoth bass and guitar kit.

[ozzbike]

Been doing the budget and it appears this kit may be a goer earlier than expected.

Sadly my electronics experience is limited. However, it became apparent to me that as in my PBG PBH bass....why can I not control this just with the use of volume pots. The wiring diagram suggests using the two pots closest to the neck for the bass and the two nearest the bridge for the guitar.

This would allow the two switches to control pick up selection for each body......and then with wiring to assist....the volume and tone pots would control the output of each body to the jack socket.

Maybe I am being to simplistic but....can it work? If so it would remove the need for a third switch.....and I could use the full sized gotoh pots I like.

Plan:-

1. Tusq nuts.
2. Gotoh pots
3. Sprague caps
4. Switchcraft jack socket
5. DT colourless finishing kit for both the body and neck....hence the name Nude Dude.
6. As money and the build reaches acceptable limits look at pickup upgrade. I like Tone Rider.....so maybe Rocksong humbuckers and a Jazz bass set.

Has anybody got any suggestions and ideas?