I was going to ask how humid it was when spraying the last coat. It causes clouding. I agree with stan, you'll have to sand it back and do it again.
I was going to ask how humid it was when spraying the last coat. It causes clouding. I agree with stan, you'll have to sand it back and do it again.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Update on finish. I went to a different supplier and got two more cans, then I sanded back the body a bit and re-spray and YES the gloss is back. So it looks like the other two cans are label wrong or faulty in some way. It wasn't humidity because before doing the body I just finished the neck but didn't have enough clear left in the can to carry on so I got a new can and that's where the problem started. Anyway problem fixed just have to wait for 3 weeks now befor I can start to wet sand. I will be adding a build diary soon. Stay Tune.
Peter H
Posting Permissions
Reply With Quote