Quote Originally Posted by neverwas View Post
Tindrrel tried to do the same thing to his ST and wasn't able to get the veneer to follow all the curves.

http://www.buildyourownguitar.com.au...light=tindrrel

The veneer will curve to a degree, just remember it's wood not plastic. You'll probably end up with some thing similar to the SG-1F, only veneered on the flat surface. Hope this helps.

Grant
Ok Neverwas, i took a good look at the SG-1F and your right, that is the way to go, only veneer on the flat surfaces. Im going to scrap the vacuum bag idea and use weights, thanks for the help man.