New member

[wazkelly]

thank you Andy ,,,,, ok , I can understand english , I dont know to write english

Hi Merkos, last August I was where you are at.....a big brown box fill with bits and pieces had just arrived but not much in the way of instructions to be found anywhere inside the box.....fully understand your situation.

Andy has recently built a Tele as have many other forum members and suggest hopping over to the build threads and have a look at how others have done theirs. Here is the link http://www.buildyourownguitar.com.au...splay.php?f=56

There are at least 3 Tele's on the 1st page.

[merkos]

Thank you for your time and for your help wazkelly , but I can't find nothing for this issue (holes of bridge TL A1 . I was reading all night yesterday ) it is my fault when I buy this guitar kit from this company.I didn't see the picture that doesn't have holes because I had seen first the LP kit and I see it was have holes and I make mistake. Now I will send a message to the company pitbull if they don't help me someone,,, never mind. Thank you again.

[WeirdBits]

Merkos, the best place to start is the How to build... section of the forum, and specifically the general 'How to build' guide thread.

Positioning the bridge on a TL style kit is relatively straight forward, but obviously important to get correct. This video should give you a general idea of the process, but if you have specific questions start a build diary and the forum members will be able to help guide you through it step by step.

[merkos]

1.000.000 Thank you my friend for your time and for this video !!!!!!!!!!!!!!!!!!!!