Quote Originally Posted by wokkaboy View Post
nice work so far Damo, so with the switch in the lower horn what controls will you have in the usual area just 1 volume and 1 tone ?

EDIT just saw the stain looks great !
Thanks mate , so for the controls I have gone with 2 volumes so I can turn off a pickup and use the 3 way switch for the Tom Morrello tricks, and 1 tone which is also a push\pull pot, setup to split the coils of both of the pickups for a bit of enhanced tone tweaking, the volumes are CTS 500k audio taper and the tone push\pull is a Bourns 500k Audio taper.The 3-way toggle and input jack are both switchcraft. I had to get a blank strat scratch plate it was shaped on the outside edge but I had to cut out the holes for the humbuckers, vol/tone pots and also widen the back of it to fit the Floyd Rose.

I am using 2 pickups I already had in my collection of stuff , the bridge is a Seymour Duncan Custom 5 (basically a hotrodded PAF) and the neck is a Gibson Tony Iommi Signature pickup, I've also installed a Mallory mustard capacitor .uf22 on the tone pot after watching a really good tone cap comparison video on the youtube and because i have an orange drop on another guitar so thought I would try something different