getting closer HB, so you say there are clear coats on that ?
getting closer HB, so you say there are clear coats on that ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thks Doc, best part it the Hammer spray is so forgiving to a hack like me....After I sprayed it I dropped a tool on the finish...Left a ding....Just spayed some more to cover it up...I like the Dart Tan Polish...Cheap Arse finish...Will Spray the hell out of it is Gloss Varnish....It will be Chinese humbuckers BUT I am splitting the coils and added Push Pull Pots. I am using the the parts that came with the original kit. The Logo will be similar to this
![]()
Current Builds.
TL Quited Maple.
Thats why I use hammer finish in my office on all the furniture, scratch the desk top? Brush on some hammer finish, 2hrs later ...what scratch?
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
The Gigsum Hammer of the Gods 'Apollo'
Here are the latest shots, body has been sprayed numerous times and wet sanded back...It will now cure for 3 weeks for compound rub and polish...The head stock however was done last so needs more spray coats...Went with The Flying Apollo AKA Led Zep tribute and the logo is GIGSUM not Gibson
![]()
![]()
Current Builds.
TL Quited Maple.