Results 1 to 10 of 272

Thread: The D.I.Y. FX Pedal Building Thread

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,079
    Cool Doc what chip does the OD-1 use

  2. #2
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,552
    Quote Originally Posted by kimball492 View Post
    Cool Doc what chip does the OD-1 use

    I think it's the venerable, and much sought-after, JRC4558D chip that was used in the OD-1, I could be wrong though, but it is the most likely chip that was used due to it's cheapness, there are a few alternative chips you can use in the circuit, which are pin-for-pin compatible with the pin-out of the JRC4558D, a couple that come to mind are the TLO72CP, and the LM833, there are a couple of high-end chips which are also pin-for-pin compatible too.


    The TS Tube Screamer circuit and the OD-1 circuit are very similar to each other, the only difference being that the OD-1 doesn't have the extra tone-control stage included, so you only have a Drive control and a Volume control.
    Last edited by DrNomis_44; 17-08-2016 at 06:46 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •