Quote Originally Posted by wokkaboy View Post
nice work Simon good to see how you made them. With the hole saw did you slide the centring pilot drill bit up so it wasn't poking out for the wenge tops? I've never thought of that technique. The knobs and truss rod cover are a nice personal touch. Now I know your technique I might have a crack at wooden knobs next scratchy cheers
I bought the cheapest hole saw kit from the green shed, which is the craftright one. So there's the hole saw attachment which has a 6mm drill bit attachment with an allen screw, and I took out the drill bit. I reckon the drill bit is there to centre the hole saw properly. Without it you may have noticed the hole saw was wandering quite a fair bit.